All subcategories
    Home / Knowledge Centre (page № 3)

    Knowledge Centre

    Flexachem is a leading Supplier of Mechanical Products, Process Equipment and After-Sales Services – we offer bespoke Solutions designed to suit even the most complex of processes within Pharma and Biotechnology Industry.

    Pump
    May 18, 2020
    / 7 min read

    What is a Self-Priming Pump?

    What is a Self-Priming Pump? A Self-priming pump was inherently designed to allow the pump to re-prime itself typically under lift conditions. It can clear its passages of air if it becomes air bound and resume delivery of the pumpage without requiring outside attention. A self-priming pump will lift fluid from a level below the

    • Mechanical Seals
      November 25, 2016
      / 7 min read

      Does your Operation Suffer from Dry Running Seals?A solution for you.

      Flowserve’s Solution to avoid Dry Running Seals. The holy grail of the seal industry is one step closer with Flowserve’s patented diamond faced technology allied to the innovative design characteristics for the ISC2 series of seals. It will help you to avoid the problem of Dry Running Seals. In rigorous and realistic testing at Flowserve’s R&D

    • Pump
      November 23, 2016
      / 5 min read

      Flowserve Lined Magnetic Drive Pump -Short Lead Times

      Flexachem can supply you with the Flowserve Lined Magnetic Drive Pump with short lead times. The INNOMAG TB-MAG sets a new benchmark for magnetic drive pump value and performance. This versatile pump is engineered to provide low total cost of ownership and exceptional leakage protection in extremely corrosive and environmentally critical applications. While the TB-MAG boasts

    • valve-solutions
      Valves
      October 27, 2016
      / 3 min read

      Contact the Team that leads the way in Valve Solutions.

      Valve Solutions Flexachems focus is always on providing the highest quality and most effective solution to meet your requirements. We always will select the best fit products to suit your process. Flexachems internal valves team cater for a wide range of applications including flow control and lined valves to actuation automation considerations within your plants. From Flowserve, we offer

    • Mechanical Seals
      September 7, 2016
      / 2 min read

      Seal failure or oil leakage into your product? Remove this risk with PRG Sealless Magnetic Drive Agitators

      PRG are a Globally Installed Manufacturer of Magnetic Drive Agitators for the Biotechnology, Pharma & Beverage Sectors. Magnetic drive agitators from PRG deliver a range of solutions that include low to silo mixing volumes. Their magnetic drive agitators offer aspectic cleanability & volume mixing ranges from 1 litre to 60,000 litres and are ideal for all industrial operation.

    • Other
      September 6, 2016
      / 2 min read

      Looking for an easy solution to your lumpy powders?

      Take a look at the CORA HR crusher valve today and see how it could be the perfect solution for you. Construction Advantages: Applications: Documentation and Certificates: Cora Valves also integrate perfectly with the Bolz Drums system for Sanitary Powder Applications Animation of the CORA Crusher: CORA Crusher:

    • Community Engagement
      August 23, 2016
      / 5 min read

      External Support Team

      Flexachem’s External Support Team Flexachem’s external support team are split into 4 areas covering our comprehensive product portfolio. This split is Valves, Pumps, Mechanical Seals and Process equipment. To arrange a site visit, or to contact a member of the external support team please use the contact information below. Valves & Steam Specialist – Brendan Merrigan In support

    • Valves
      June 29, 2016
      / 2 min read

      Radial diaphragm valves for Biotechnology Applications -PBM

      PBM Radial Diaphragm valves used as a tank outlet valve for aseptic applications. Radial Diaphragm Valves are specifically designed for the Pharmaceutical and Biotech Industry and tested to perform in many types of sanitary and clean steam applications. They comply with ASME BPE guidelines and offer valve certifications. Optional purge port and tank connections available. Exceeds performance requirements of ASME- BPE accelerated testing. Further information is available upon request. Contact

    • Valves
      September 11, 2015
      / 1 min read

      Neoceram – Ceramic Pumps & Valves

      Neoceram valves provide a high-tech filling solution for precision liquid filling for pharmaceutical, food, industry and cosmetic applications.All pumps and valves are made in proprietary high grade ceramic oxides and all devices are FDA and cGMP compliant.Neoceram specialise in dosing small and medium volumes of sterile liquids for which precision over time, clean ability and

    • Other
      September 11, 2015
      / 2 min read

      Bram Cor Water Technology

      BRAM-COR Pharmaceutical Water Treatment Systems are designed to produce; Pre-treatment options, monitoring of critical parameters, regulatory requirement for product quality, consumptions, microbiological control, operation and maintenance requirements, lifecycle costs are key in our design of all processing steps, from feed water to the point of use. Special care is given to the choice of sanitary