K44 ’Checktite’ non-return valve
‘Checktite’ is a swing check valve employing a three-piece construction similar to that used in ball valve design. The valve is available in carbon steel or stainless steel with PTFE, Viton® or metal to metal seats. Sizes range from DN8 to DN50 reduced bore and DN8 to DN40 full bore.
The straight-through flow, compact design and ease of servicing makes the ‘Checktite’ the natural choice for many applications. It is particularly suitable for hydrocarbon and chemical process lines.
- Three piece construction makes installation quick and simple.
- Valve body swings away for ease of maintenance or cleaning.
- Wide range of end connectors. (Screwed or weld)
- Exceptionally low cracking pressure and pressure drop.
- Available with virgin PTFE, Viton® and metal to metal seating.
- Bubble tight shut off (0.7bar.g Viton®, 6.9bar.g PTFE)
- Optional clack springs available for vertical installations and critical water hammer conditions.
- BS EN 10204:2004 (3.1.b) certification available.
K44 Checktite.pdf
K44 Checktite.pdfK44 Drawings.pdf
K44 Drawings.pdfContact our Valve Specialist Team:
Brendan Merrigan (External) – Mob: 087 2598124
Internal Team
Brian Barry – Tel: 021 461 7211
Darragh Rodgers- Tel: 021 461 7241
Miriam Adair- Tel: 021 461 7235
Ross O’Donovan – Tel: 021 461 7230
Shauna O’Connor – Tel: 021 461 7237
Tim Quigley – Tel: 021 461 7209
Vicki McGrath – Tel: 021 461 7207
Tel: 021 461 7200