All subcategories 
Full Bore Ball Valves – AKH2
Full bore ball valves feature an oversized ball, ensuring that the hole in the ball is the same size as the pipe’s internal diameter, which allows for straight-through flow and positive shut-off with minimal pressure drop and very little resistance to the flow of liquid. The AKH2 Atomac Lined Ball Valve is a two-piece full bore standard lined ball valve with a corrosion-resistant fluoropolymer lining.
This full port design minimizes pressure loss and increases flow capacity, reducing energy and pumping costs. It features an ISO 5211 universal mounting pad, allowing for easy automation even with the valve in the pipeline.
- Specifications
- Advantages
- Industries
- Applications
- Documents
- Contact
Specifications
- Valve Body Material: Ductile Iron A395, FEP/PFA, DIN EN 1563*
- Ball Material: CF-8M stainless steel body armor, ball and stem inserts
- Temperature Range: FEP to 300°F (150°C), PFA to 400°F (200°C)
- Sizes Available: 1⁄2 in (15 mm) through 12 in (300 mm)
*DIN dimensional only – not available to ANSI (ASME) dimensions.
Advantages
- Bubble-Tight Shut Off: Ensures no leaks.
- Low Maintenance: No-leak stem seals and a graphite bearing to prevent side loading and extend seal life.
- Safety Design: Features an anti blow-out stem design.
- Free-Floating Ball Design: Offers low frictional coefficients, low operating torques, positive shut-off across the pressure range, and reduces stem side loads to eliminate potential leaks to the atmosphere.
- High-Quality Liner Material: Fluoropolymer thick liner material is 100% inspected at 20,000 high voltage for defects and offers high corrosion resistance.
Industries
- Leaching Acid
- Pharmaceuticals
- Waste Processing
- Water Treatment
- Food Processing
- Agriculture
- Bleach Chemicals
- Caustic and Chlor-Alkali
- Chemical and Liquor
- Acid Transfer
Applications
Free-flowing applications such as pigging in pipelines.
Contact Us
Contact our Pump Specialist Team
- Phil Soltan (External) – mob: 086 185 3782
- Adrian McSweeney – tel: 021 461 7212
- Paul-Fox Morris – tel: 021 461 7231
- Una Long (Pump & Service Support) – tel: 021 431 7200
- Tel: 021 461 7200
-
PumpsNETZSCHProgressive Cavity Pump
-
PumpsFlowserveSIHI SuperNova Pump ZDN – Hot Water
-
PumpsNETZSCHMulti Screw Pump
-
PumpsFlowserveMark 3 Recessed Impeller Pump
-
Mixing TechnologyChemineerChemineer HS Turbine Agitators
-
Mixing TechnologyGreercoGreerco Pipeline Mixers
-
PumpsFlowservePolyChem S-Series ANSI Overhung, Non-Metallic Pump
-
PumpsFlowserveDurco Mark 3 Pump – ANSI/ASME standard
