CavStream Anti-Cavitation Control Valve Trim
CavStream trim prevents cavitation from forming and minimizes hydrodynamic noise even under the most severe liquid applications. This unique, patented design not only eliminates cavitation damage, but also provides easy maintenance and long life, even when installed in the most difficult applications. The CavStream plug head is similar to the ChannelStream retainer. Working on the same principles as the ChannelStream, the drilled holes in the CavStream cartridge are used as expansion areas for the fluid as it enters from restrictive channels machined in the outside of all interior cylinders. This prevents the fluid recovery from occurring adjacent to a critical trim surface. Successive intersections of the restrictive channels result in additional pressure losses while expansion holes connected to the channels create a series of expansions and contractions that result in a series of pressure drops. This staged pressure drop eliminates cavitation in most applications and minimizes the energy of cavitation that may still occur in others.
Features
- Low Flow Cavitation Protection
- Same Benefits as the ChannelStream
- Fits into Mark One Replacing Only the Trim
Valtek Mark 1 and Mark 2 Control Valves (User Instructions).pdf
Valtek Mark 1 and Mark 2 Control Valves (User Instructions).pdfContact our Valve Specialist Team:
Brendan Merrigan (External) – Mob: 087 2598124
Internal Team
Brian Barry – Tel: 021 461 7211
Darragh Rodgers- Tel: 021 461 7241
Miriam Adair- Tel: 021 461 7235
Ross O’Donovan – Tel: 021 461 7230
Shauna O’Connor – Tel: 021 461 7237
Tim Quigley – Tel: 021 461 7209
Vicki McGrath – Tel: 021 461 7207
Tel: 021 461 7200