Home / Tank Venting / Flame Arrestor / Detonation Flame Arrestors / 7A00 Detonation Flame Arrestor

7A00 Detonation Flame Arrestor

Tank Venting Cashco

The 7A00 detonation flame arrestor is a device that can be fitted to the opening of an enclosure or to the connecting pipe work of a system of enclosures.

Its primary function is to allow the flow of gases or vapour of flammable liquids through the enclosure, but prevent the transmission of a flame.

The element inside the housing provides an extinguishing barrier to the ignited vapour mixture by absorbing heat from the flame.

The 7A00 is used as an independent safety system to ensure explosion protection.

The element design is bidirectional and available for horizontal or vertical installations.

Specifications
Technical Data
Advantages
Industries
Applications
Contact

Specifications

Operating Parameters:

Flows to 565 m³/h (2500 gpm)
Heads to 110 m (350 ft)
Pressures to 17 bar (250 psi)
Temperatures from -30°C (-20°F) to 90°C (200°F)

Shaft Metallurgy Options:

316 SS
Alloy 20
Hastelloy
Titanium

Features:

Full basket strainer
NEMA in-line motor
Fiberglass mounting plate
Tapered “Polygon” impeller drive
“Pull-out” bearing retainers
Level controls

Options:

Simplex and duplex pit covers
Float switches
Particulate separators
Non-metallic lubrication lines
Tailpipe

Technical Data

Engineered Polymer Composite Construction offers cost-effective corrosion-resistance, is lightweight, non-galling, non-sparking, and non-conductive.
Unitized Case with Integrally Molded Flanges at the suction and discharge nozzles, fully gusseted for structural soundness.
Externally Adjustable, Semi-Open Impeller provides consistently high efficiencies and minimizes maintenance.
Shaft/Bearing System operates below the first critical speed for less shaft whip and longer bearing life.
Bearings can be lubricated by external flush or self-lubricated by the pump fluid.
Single-Piece Column is lightweight, filament-wound, reinforced fiberglass composite for strength and rigidity.

Advantages

Lightweight and corrosion-resistant due to engineered polymer composite construction.
High efficiency and minimal maintenance with externally adjustable impeller.
Long bearing life with low shaft whip and flexible lubrication options.
Robust construction with unitized case and reinforced single-piece column.

Industries

Leaching Acid
Chemical and Liquor
Caustic and Chlor-Alkali
Bleach Chemicals
Auxiliary
Acid Transfer
OEM
Water Treatment
Water Supply and Distribution
Wastewater Collection and Treatment
Polymers
Plating, Galvanizing and Other Coatings
Pharmaceuticals
Automotive and Aircraft

Applications

Corrosive Services
General Purpose
Water Treatment
Pulp and Paper
Chemical Processing
Utility
Metal and Steel Industry
Pollution Control
Plating

Contact Us

Contact our Tank Venting Team

Michael Bradley (External) – Mob: 086 047 6178
Brendan Merrigan (External) – Mob: 087 2598124
Stephen White - Mob: 083 165 3830
Office Tel: 021 461 7200

Information provided on this form will be used for sales follow up and for marketing purposes. You can opt out at any time. Click here to read our privacy policy for full details.